Skip to content
Kelvact
AI temperature sensor for the cold chain

Nobody watches the refrigeration overnight. Kelv Sense does.

AI temperature alarm for coolers, freezers, cold rooms, vaccine refrigerators and refrigerated trucks. It alerts you when the temperature leaves its range or when the AI sees something out of the ordinary, at any hour.

Kelv Sense sensor attached inside a display cooler
4.2 °CIn range
precision temperature
±0.1 °C
instant alerts, also by e-mail and on the dashboard
WhatsApp
PDF and CSV, ready for audits and inspections
Reports
connected, one reading per minute
24/7
your data in the palm of your hand, anywhere
Phone & web
of battery life
Up to 5 years
to install, no wiring: just stick it on
Minutes
to the equipment, any brand
Zero changes
of history on the sensor, even offline
~8 months
Challenges

Where does it hurt in your operation?

Pick the problem and see how Kelv Sense solves it.

“The refrigerator stopped overnight, nobody noticed, and we threw everything away.”

  • An alert within minutes on WhatsApp, by e-mail and on the dashboard, at any hour
  • Limits and confirmation time per unit: a defrost or an open door is not a false alarm
  • The AI flags a compressor working harder than normal, before the temperature rises
R$ 220 M

lost every year by Brazilian food retail to refrigeration and storage failures

Neo Estech, 2026

How it works

Three steps. No construction work.

No wiring, no downtime and no new equipment.

Installed· no wiring · no tools
  • Alerts straight from the sensor, no waiting for the cloud
  • Offline, it keeps ~8 months and sends later
  • Data encrypted with a key per sensor
  • New AI models arrive over the air
Predictive AI

Every failure gives signs before it happens

A compressor working harder, a unit taking longer to cool down, a door that no longer seals. Kelv Sense's AI reads these signs in temperature and vibration and warns you before they turn into lost stock or a breakdown.

What the AI reads in a temperature curve

One refrigerated unit, 24 hours. Every pattern says something about the health of the equipment.

TemperatureSafe range 2–8 °C
00:0006:0012:0018:0024:00
Illustrative curve based on the real behavior of commercial refrigeration equipment.
  1. 1

    Compressor cycles

    The on/off rhythm shows how hard the compressor works.

  2. 2

    Defrost

    A planned warm-up. Telling it apart from a fault avoids false alarms.

  3. 3

    Door openings

    A short temperature rise with a vibration impact.

  4. 4

    Slower recovery

    Taking longer to cool back down points to wear: seal, condenser, refrigerant.

What it's worth in your operation

The same failure costs each business something different. Pick yours.

  • Stock protected

    Vaccines and medicines survive a night without power: someone is alerted in minutes.

  • No more paper logs

    Nobody writes temperatures down twice a day. The record is automatic.

  • Calm inspections

    A ready report avoids fines and discarding doses on suspicion.

  • Healthy refrigerators

    A compressor working too hard shows up before it fails.

Savings estimate
10
$3,700
$5,849a year
$585 per unit a year
Where it comes from
  • Stock not lost$2,960
  • Staff time$2,333
  • Fines and discards avoided$556
Assumptions behind this estimate
  • 10% chance per year of a loss nobody notices in time
  • 80% of that loss avoided by the alert
  • 3 hours a month of manual logging per unit
  • $6.48 per staff hour
  • $56 a year in fines and discards avoided (expected value)

Illustrative estimate with market assumptions from Brazil, converted at R$ 5.40 per US$. In the demo we redo it with your numbers.

Calculate with my numbers
Dashboard

Every cold asset under control

Each piece of equipment becomes an asset with status, temperature and compressor health, across all your sites, in any browser..

Fleet overviewExample
Monitored assets
48
Healthy
44
Attention
3
Critical
1
Downtown
North
South
Distribution center
NormalAttentionCritical· Select an asset to see its details
Cold room 02
Downtown
Health: Watch
Temperature now
3.4 °C
Last 24 h
Compressor run time, last 14 days
AI: compressor on 68% of the time for 5 days, above its normal 45%

Why measuring vibration pays

Temperature only changes once the problem has started. The compressor changes first: it starts more often and runs longer. Measuring vibration buys time to act, and that time is the difference between a planned visit and a loss.

Equipment condition
Vibration sees itTemperature sees itBreakdown
Time →
  1. Relative cost: 1
    Planned visit
  2. Relative cost: 2
    Corrective visit, product at risk
  3. Relative cost: 4
    Emergency, lost stock, sales stopped
  • Condition-based maintenance

    A technician only where the compressor needs one, not by calendar.

  • Energy

    A compressor working too hard points to a poor door seal or a dirty condenser.

  • Equipment life

    Fixing early spares the compressor, the most expensive part of the unit.

  • A prioritized fleet

    Hundreds of units ranked by health, to plan the service route.

Regulations

The rules for your sector, in one place

Which rules require temperature control and records in your business, and how Kelv Sense helps you meet them.

Vaccine and medicine refrigerators

  • CDC Vaccine Storage and Handling Toolkit

    United States

    Clinics in the VFC program monitor vaccine storage continuously with a digital data logger that has a valid calibration certificate.

  • WHO TRS 961, Annex 9

    International

    Model guidance for storing and transporting temperature-sensitive medicines, with monitored and recorded temperatures.

  • Anvisa RDC 197/2017 and RDC 44/2009

    Brazil

    Vaccination services and pharmacies: dedicated refrigerators with a daily record of the minimum and maximum temperature.

How Kelv Sense helps

  • A reading every minute, with the daily minimum and maximum
  • 24/7 alarms on WhatsApp, by e-mail and on the dashboard
  • PDF and CSV reports for inspections and audits
  • About 8 months of history on the sensor, even offline

Reference list, not legal advice. Calibration certificates, written procedures and room humidity follow each rule: check with your quality lead or health authority.

FAQ

Frequently asked questions

What makes Kelv Sense different from other temperature monitors?

Common monitors measure only air temperature, so they warn you when the product is already warming up. Kelv Sense also measures compressor vibration, which changes earlier: when the compressor starts more often or runs longer, you can swap a breakdown with lost stock and an emergency call for a planned visit, and you see the energy each unit wastes. The analysis runs inside the sensor, the alert goes out immediately and new AI models arrive over the air, without replacing the hardware.

How much will I save?

It depends on the value of what you keep cold, how often failures happen and what maintenance costs you. The calculator in the Predictive AI section gives an estimate per type of business; in the demo we redo it with your numbers.

Where does Kelv Sense use AI?

In the cloud, the AI learns the normal behavior of each unit (compressor cycles, defrosts, door use and the thermostat level) and points out what departs from it: a setpoint that moved, a compressor working harder than normal, a stop or a power cut. That becomes alerts, analyses and each unit's health indicator. New AI models also reach the sensor itself through over-the-air updates.

How do I receive the alerts?

On WhatsApp, by e-mail and on the dashboard, sorted by priority. Critical alerts (temperature out of range, sensor fault, low battery or a sensor silent for too long) go to WhatsApp; attention alerts (such as a possible setpoint change) stay on the dashboard and in e-mail. Limits and confirmation time are set per unit, so a defrost or an open door does not become a false alarm.

Does Kelv Sense meet the rules of my sector?

It delivers what the rules ask for temperature: continuous readings, the daily minimum and maximum, alarms and a report for the inspector. The Regulations section lists the main rules per sector. Items such as calibration certificates, written procedures and room humidity depend on each rule: check with your quality lead.

Does Kelv Sense produce reports for audits?

Yes. The dashboard generates PDF and CSV reports with the daily readings, minimum, maximum and average of each unit, ready for audits and health inspections.

Which equipment can be monitored?

Coolers and display cases, vaccine and medicine refrigerators, freezers, cold rooms and refrigerated trucks, of any brand.

Do I need to modify my equipment?

No. The sensor is stuck on the inside, with no wiring and no changes to the equipment. Installation takes a few minutes.

How does the data reach the dashboard?

A gateway on site receives the sensors over Bluetooth and sends the data to the cloud through the site's internet or 4G.

What happens if the internet or the gateway goes down?

The sensor keeps measuring and stores about 8 months of history. When the connection returns, the missing period is recovered automatically.

Can I follow several sites?

Yes. Equipment is organized by site, with a consolidated view of the whole operation, and each customer has its own access.

See how much Kelv Sense saves in your operation

Tell us your challenge. In the demo we calculate the savings with your numbers, walk through the rules of your sector and show Kelv Sense working on your equipment.

Or write tocontact@kelvact.com